Research Possibilities for investigations of thin coatings include:

In Institute of Materials Science and Engineering of LUT:

- thickness - Calotest and Nomarsky's interference microscopy

- microhardness - CLEMEX (France), ZWICK 3202

- nanohardness - MTS NanoIndenter G200

- adhesion by scratch-test and Rockwell indentation

- nanoscratch-test - MTS NanoIndenter G200

- surface roughness and profilometry - Hommel Tester T1000

- optical microscopy - OLYMPUS GX-71 with digital recording and image analysis

- AFM - Atomic Force Microscopy - Veeco

- SEM - Scanning Electron Microscopy - Hitachi S-3000N

- EDS - chemical composition - Thermo Noran attachment to SEM

- XRD - phase composition - Siemens D-500

- friction and wear resistance - Tribometer T-11 (ITeE Radom, Poland)- "Pin-on-disc" geometry

- corrosion resistance -

 

In cooperation with other institutes:

- Raman spectroscopy - Yobin Jvon T-64000

- FTIR

- XPS - X-Ray Photoelectron Spectroscopy - Multifunctional Electron Spectrometer PHI 5700/660 by Physical Electronics

- AEES - Auger Electron Energy Spectroscopy

- Ellipsometry - Yobin Jvon UVISEL

- Profilometry - Veeco Dectac 150

- Fretting and wear during friction - Lyon, France

 Publications

 

  1. B. Wendler, T. Moskalewicz, D. Rudnik, S. Zimowski, M. Kot, M. Grobelny, W. Pawlak, A. Rylski, A. Czyrska-Filemonowicz, M. Makowka, P. Nolbrzak, K. Włodarczyk: Nanocomposite carbon- or MoS2-based selflubricating coatkings for automative, aviation and spacecraft industries. Composites theory and practice 13: 1 (2013) 52-58
  2. M. Grobelny, B. Dytkiewicz, D. Rudnik, P. Nolbrzak, K. Włodarczyk, M. Makówka, W. Pawlak: Corrosion resistance of low friction, nanocomposite MoS2Ri, MoS2(Ti,W) coatings deposited by magnetron sputtering on Ti6Al4V titanium alloy. Ochrona przed korozją vol. 55 (4) 2012, 160-163
  3. W. Pawlak, R. Atraszkiewicz, B. Wendler, M. Zak: Tribological investigation of low friction duplex surfaces treatment based on modified molybdenum disulphide coating. Trybology Materials, Surface & Interface, Vol. 5, No. 4, (2011) 148-153
  4. T. Moskalewicz, B. Wendler, B. Dubiel, A. Czyrska-Filemonowicz: Microstructure, micro-mechanical and tribological properties of the nc-WC/a-C nanocomposite coatings magnetron sputtered on non-hardened and oxygen hardened Ti-6Al-4V alloy. Surface and Coatings Technology 205 (2011) 2668-2677
  5. M. Makówka, B. Wendler, W. Pawlak, J. Sielski, M. Kozanecki: Wysokotemperaturowe, niskotarciowe powłoki na bazie MoO3 i Ag osadzane metodą magnetronową. Inżynieria Materiałowa 4 (182) 2011; 553-557
  6. G. Cempura, T. Moskalewicz, S. Zimowski, B. Wendler, A. Czyrska-Filemonowicz: Mikrostruktura i właściwości powłoki nc-WC/a-C na stali szybkotnącej HS-6-5-2. Inżynieria Materiałowa 4 (182) 2011; 359-362
  7. Wendler B.G., Functional coatings by CVD and PVD methods. Printing House of the Institute for Sustainable Technologies ? National Research Institute in Radom. Copyrightby B.G. Wendler, Technical University of Lodz, 2011 Lodz, Poland. ISBN 978-83-7789-0001-1.
  8. T. Moskalewicz, B.G. Wendler, A. Czyrska-Filemonowicz: Microstructural characterization of nanocomposite nc-MeC/a-C coatings on oxygen hardened Ti-6Al-4V alloy. Materials Characterization 61 (2010) 959-968
  9. Progalskiy I., Wendler B., Nolbrzak P., Deposition and properties of magnetron sputtered nc?TiN/a-Si3N4 nanocomposite coating on indexable inserts for cutting tools. Paper presented during 20th International Workshop on Computational Mechanics of Materials in Loughborough University, Loughborough, UK, September 08-10, 2010. Papers of the Special Session of the 2nd MaMiNa Conference on Macro-, Micro- and Nano-aspects of high speed machining printed by Loughborough University, September 2010, 77-82.
  10. B. Wendler, T. Moskalewicz, I. Progalskiy, W. Pawlak, M. Makówka, K. Włodarczyk, P. Nolbrzak, A. Czyrska-Filemonowicz, A. Rylski: Hard and superhard nanolaminate and nanocomposite coatings for machine elements based on Ti6Al4V alloy. Journal of Achievements in Materials and Manufacturing Engineering 43 (1), November 2010, 455-462
  11. W.Pawlak, R.Atraszkiewicz, P.Nolbrzak, B.Wendler: Niskotarciowe powłoki MoS2(Ti,W) osadzane metodą magnetronową na azotowanej i azotonasiarczanej stali szybkotnącej Vanadis 23. Inżynieria Materiałowa 4 (176), 2010, 1157-1161
  12. T.Moskalewicz, M.Kot, K.Włodarczyk, B.Wendler, A.Czyrska-Filemonowicz: Charakterystyka mikrostruktury i właściwości nanokompozytowych powłok nc-TiC/a-C na stali VANADIS 23 i na stopie Ti-6Al-4V. Inżynieria Materiałowa 4 (176), 2010,1120-1123
  13. W. Pawlak, B. Wendler, P. Nolbrzak, M. Makówka, K. Włodarczyk, A. Rylski: Low friction MoS2(Ti,W) coatings deposited by magnetron sputtering. Inżynieria Materiałowa 3 (2010) 418-421
  14. M.Makówka, T.Moskalewicz, K.Włodarczyk, B.Wendler: Niskotarciowe i odporne zużycie nanokompozytowe powłoki typu nc-CrC/a-C oraz nc-CrC/a-C:H. Inżynieria Materiałowa 4 (176), 2010, 1091-1095
  15. K. Włodarczyk, M. Makówka, P. Nolbrzak, B. Wendler: Low friction and wear resistant nanocomposite nc-MeC/a-C and nc-MeC/a-C:H coatimgs.  Journal of Achievements in Materials and Manufacturing Engineering 37(2), Dec. 2009, 364-360
  16. I. Progalsiy:A PVD systems for deposition of superhard nc-TiN/a-SiN coatings. MaMiNa Special Session Abstracts and Papers 2009, 65-67
  17. W. Pawlak, B. Wendler: Multilayer, hybrid PVD coatings on Ti6Al4V titanium alloy. Journal of Achievements in Materials and Manufacturing Engineering 37(2), Dec. 2009, 660-667
  18. T. Moskalewicz, B.G. Wendler, S. Zimowski, S. Milc, A. Czyrska-Filemonowicz: Microstructure & properties of oxygen diffusion-strengthened Ti6Al7Nb alloy. Engineering of Biomaterials 89-91, Vol. 12, Spec. Edition Dec. 2009, 125-128.
  19. W. Pawlak, B. Wendler: Applications of multisource hybrid arc ? magnetron sputtering deposition of low friction coating. Electronics - Constructions, Technologies, Applications. L No 9/2009, 61 - 64
  20. C. Rapiejko, S. Fouvry, B. Grosgogeat, B.G. Wendler: A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts. Wear 266 (2009) 850-858
  21. B.G. Wendler, Piotr Nolbrzak, Wojciech Pawlak, Adam Rylski: Structure and properties of WC1-x/C coatings deposited by reactive magnetron sputtering on ASP2023 HSS steel and monocrystalline Si substrates. Materials Engineering (Poland) Vol. 165-166 (Year XXIV), Issue 5-6, Nov.-Dec. 2008, 655-657.
  22. T. Moskalewicz, B. Rutkowski, B.G. Wendler, F. Smeacetto, M. Salvo, H.-J. Penkalla, A. Czyrska-Filemonowicz: Microstructure, mechanical properties and oxidation behaviour of the TiAl(Si,Ag) coating. Surface and Coatings Technology 202 (2008) 5876-5881.
  23. R. Rybiak, S. Fouvry, T. Liskiewicz and B. Wendler: Fretting wear of a TiN PVD coating under variable relative humidity conditions-development of a 'composite' wear law. Surface and Coatings Technology 202, Issue 9, 1 February 2008, 1753-1763.
  24. B.G. Wendler, W. Pawlak: Low friction and wear resistant coating systems on Ti6Al4V alloy. J. of Achievements in Materials and Manufacturing Engineering Vol. 26 Issue 2 February 2008, 207-210.
  25. E.N. Hoffman; G. Yushin; B. Wendler; M. W Barsoum; Y. Gogotsi: Carbide Derived Carbon Membrane. Materials Chemistry & Physics 112 (2008) 587-591 (access on-line from Materials Chemistry and Physics 2008, doi:10.1016/ /j.matchemphys.2008.06.006).
  26. B.G. Wendler, W. Pawlak: Principles of the functional gradient coatings deposition by means of low pressure cathode arc method with several independent arc sources. Chapter 7.2 in "Designing and manufacturing of gradient functional materials" - State Project PBZ-KBN-100/T08/2003 ordered by the Ministry of Science and Information Technology of Poland, Copyright by the Institute of Metallurgy and Materials Engineering of the Polish Academy of Science, Issue 1, Cracow 2007, ISBN 978-83-60768-00-6, pp. 210-216.
  27. T. Moskalewicz, B. G. Wendler, A. Czyrska-Filemonowicz: High temperature oxidation-resistant intermetallic coatings sputter-deposited on Timetal834. Advances in Materials Science 3 (2007) 80-85.
  28. B.G. Wendler: Metallography of functional coatings. Acta Metallurgica Slovaca 13 Issue 1 (2007) 74-83.
  29. Ł. Kaczmarek, B.G. Wendler, D. Siniarski, A. Rylski, D. Bielinski, O. Dobrowolski, P. Lipinski: Oxidation resistance of refractory ?-TiAlW coatings. Surface & Coatings Technology 201, Issue: 13, March 26, 2007, pp. 6167-6170.
  30. B. Wendler, S. Bin: Oxidation resistant FeAlCrSi and SiC coatings on ferritic AISI 430 SS steel. Inżynieria Materiałowa 3-4 (157-158) Rok XXVIII (2007) 804-809.
  31. S. Kania, B. Wendler, M. Jachowicz, J. Zimnicki: Basic electrical and optical properties of protective SiCx and Siny layers. Inżynieria Materiałowa 3-4 (157-158) Rok XXVIII (2007) 270-274.
  32. T. Moskalewicz, B. Rutkowski, B. Wendler, F. Smeacetto, M. Salvo, H.-J. Penkalla, A. Czyrska-Filemonowicz: Microstructure and properties of the protective Ti-Al-Si-Ag coatings. Inżynieria Materiałowa 3-4 (157-158) Rok XXVIII (2007) 698-701.
  33. Ł. Kaczmarek, B.G. Wendler, D. Siniarski, A. Rylski, D. Bielinski, O. Dobrowolski, P. Lipinski: Oxidation resistance of refractory ?-TiAlW coatings. Surface & Coatings Technology 201, Issue: 13, March 26, 2007, pp. 6167-6170.R.
  34. Ł. Kaczmarek, B.G. Wendler: "Magnetron deposition and properties of refractory ?-TiAl coatings" http://www.dgm.de/past/2006/junior-euromat/program. Int. Conf. Junior Euromat 2006, 4-8 Sept. 2006, Lausanne, Switzerland (Session 5, Topics B, E).
  35. B. Wendler, Ł. Kaczmarek, M. Jachowicz, A. Rylski: Oxidation Resistant of Nanocrystalline Microalloyed ?-TiAl Coatings Under Isothermal Conditions and Thermal Fatigue. Materials Science Forum 153 (2006) 135-148
  36. K. Kubiak, S.Fouvry, B.Wendler: Comparison of Shot Peening and Nitriding Surface Treatments Under Complex Fretting Loadings. Materials Science Forum 153 (2006) 103-118.
  37. T. Liskiewicz, R. Rybiak, S. Fouvry and B. Wendler: Fretting wear of Ti(CxNy) PVD coatings under variable environmental conditions. Proc. IMechE Vol. 220 Part J: J. Engineering Tribology 139 (2006) 125-134.
  38. B. Wendler, M. Danielewski, K. Przybylski, A. Rylski, Ł.Kaczmarek, M. Jachowicz: New type AlMo-, AlTi- or Si-based magnetron sputtered protective coatings on metallic substrates. Journal of Mat. Proc. Technology 175 (2006) 427-432.
  39. B. Wendler, M. Jachowicz, M. Karolus, L. Adamczyk, A. Rylski: Powłoki ochronne SiC, SiCN i SiN na stopach metali osadzane reakcyjną metodą magnetronową przy niskich temperaturach. Inżynieria Materiałowa 3 (151) Rok XXVII (2006) 551-553.
  40. B. Kucharska, B. Wendler, M. Danielewski: Charakterystyka powłok na osnowie stali AISI 310S osadzonych metodą rozpylania magnetronowego na podłożu ze stali AISI 304. Inżynieria Materiałowa 3 (151) Rok XXVII (2006) 463-466.
  41. Ł. Kaczmarek, B. Wendler: Odporność powłok ?-TiAl na korozję gazową. Inżynieria Materiałowa 5 (153) Rok XXVII (2006) 1035-1037.
  42. W. Pawlak, A. Młotkowski, B. Wendler: Symulacja metodą MES rozkładu i wartości naprężeń generowanych w osnowie podczas chłodzenia kompozytu Ti6Al4V/TiCxNy po spiekaniu. Inżynieria Materiałowa 5 (153) Rok XXVII (2006) 1170-1173.
  43. B. Wendler, W. Pawlak, J. Senkara, D. Sankowski, A. Kubiak, M. Jachowicz, A. Rylski, D. Grzelczyk: Nowy kompozyt metalowo-ceramiczny w układzie Ti6Al4V/TiN. Inżynieria Materiałowa 5 (153) Rok XXVII (2006) 1248-1253.
  44. B. Wendler, R. Rybiak, W. Pawlak, M. Jachowicz, I. Siemieniec-Redlicka, A. Rylski: Podstawowe charakterystyki użytkowe nowego kompozytu metalowo-ceramicznego w układzie Ti6Al4V/TiN. Inżynieria Materiałowa 5 (153) Rok XXVII (2006) 1255-1259.
  45. L. Adamczyk, M. Jachowicz, B. Wendler, M.T. Gałkowski: Protective properties of SiC coatings on 2H13 type stainless steel. Ochrona przed korozją 2006.
  46. D. Rylska, B. Wendler, M. Łukomska-Szymańska, J. Sokołowski: Ocena właściwości ochronnych powłok węglika krzemu (SiC) wytwarzanych na metalowych elementach protez. Nowoczesny Technik Dentystyczny, Wydanie specjalne - Materiały VII Konferencji nt. Biomateriały i Mechanika w Stomatologii, Katowice 2006, 212-217.
  47. B. Wendler, Ł. Kaczmarek: Oxidation resistance of nanocrytalline microalloyed ?-TiAl coatings under isothermal conditions and thermal fatigue. Journal of Materials Processing Technology 164-165 (2005) 947-953.
  48. T. Liskiewicz, S. Fouvry, B. Wendler: Development of a Wöhler-like approach to quantify the Ti(CxNy) coatings durability under oscillating sliding conditions. Wear 259 (2005) 835-841.
  49. T. Liśkiewicz, S. Fouvry, B. Wendler: Hard coatings durability under fretting wear. Life Cycle Tribology Vol. 353, D. Dowson et al. (Editors), Elsevier B.V., Leeds- Lyon 2005, pp. 657-665. ISBN 0-444-51687-5657-665.
  50. B. Wendler, D. Rylska, A. Rylski, M. Jachowicz, Ł. Kaczmarek, W. Pawlak, T. Liśkiewicz: PVD protective coatings on metallic substrates. Surface Engineering 2 (2005) 14-18 (in Polish)
  51. B. Wendler, D. Sankowski, J. Senkara, A. Rylski, W. Pawlak, Ł. Kaczmarek, M. Jachowicz: The effect of chemical composition of ceramic phase on the wetting angle in the system Ti6Al4V/TiCxNy. Materials Engineering 5 (2005) 647 - 649 (in Polish).
  52. L. Klimek, D. Rylska, B. Wendler: Morphology and structure of SiC coating on dental alloy WIROBOND. Materials Engineering 5 (2005) 616 - 618 (in Polish).
  53. B. Januszewicz, B. Wendler, T. Liśkiewicz, Ł. Kaczmarek: Structure and hardness of Ti6Al4V alloy after hardening treatment by oxidation. Materials Engineering 5 (2005) 654 - 656 (in Polish).
  54. B. Wendler, M. Danielewski, J. Dąbek, A. Rylski, R. Filipek: Modern refractory AlMo and AlMoSi coatings on steels. Thin Solid Films 459 (2004) 178-182.
  55. B. Wendler, Ł. Kaczmarek, L. Klimek, A. Rylski, M. Jachowicz: Nanocrystalline ?-TiAl based microalloyed coatings as gas corrosion barriers. Review on Advanced Materials Science 8 (2004) 34 - 40.
  56. S. Fouvry, B. Wendler, T. Liskiewicz, M. Dudek, L. Kolodziejczyk: Fretting wear analysis of TiC/VC multilayered hard coatings: experiments and modelling approaches. Wear 257, Issue 7 - 8, October (2004) 641 - 653.
  57. J. Richter, B.G. Wendler: The Effect of HSS Steel Substrate on TiC Layer Formation During a Reverse Duplex Hardening. Materials Engineering 3 (140) Vol. XXV May-June 2004, 640-643 (in Polish).
  58. B.G. Wendler, M. Jachowicz, D. Rylska, M. Danielewski, D. Bielinski, A. M. Wrobel, L. Kaczmarek, A. Rylski, T. Liśkiewicz: Si-based protective coatings on Si and metallic substrates. Materials Engineering 3 (140) Vol. XXV May-June 2004, 676-680 (in Polish).
  59. B. Wendler, Ł. Kaczmarek, M. Jachowicz, A. Rylski: Oxidation resistant coatings on ?-TiAl alloy. Materials Engineering 3 (140) Vol. XXV May-June 2004, 676-680 (in Polish).
  60. B. G. Wendler, T. Liśkiewicz, Ł. Kaczmarek, B. Januszewicz, D. Rylska, S. Fouvry, A. Rylski, M. Jachowicz: Diffusion Strengthening of Ti6Al4V Alloy in Ar + O2 Glow Discharge Plasma. Inżynieria Materiałowa 3 (140) Rak XXV Maj -Czerwiec 2004, 681-685.
  61. B. G. Wendler, M. Jachowicz, Ł. Kaczmarek, A. Rylski, D. Bieliński, A.M. Wróbel, K. Jakubowski : Investigation of magnetron deposited Si-based protective coatings on Si and steel substrates. Acta Metalurgica Slovakia Vol. 10, No 1 (2004) 615-619.
  62. B. G. Wendler, M. Jachowicz, Ł. Kaczmarek, A. Rylski: Investigation of magnetron deposited oxidation resistant coatings on ?-TiAl alloy. Acta Metalurgica Slovakia Vol. 10, No 1 (2004) 919-925.
  63. T. Liśkiewicz, S. Fouvry, B. Wendler: Impact of Variable Loading Conditions on Fretting and Wear. Surface and Coatings Technology, 163 - 164 (2003), 465 - 471.
  64. M. Dudek, B. Wendler, S. Fouvry, Ph. Kapsa, T. Liśkiewicz: The Effect of Modified Surface Layers on Friction and Wear. Vacuum 70 (2003) 187 - 191.
  65. M. Danielewski, S. Datta, J. Dąbek, R. Filipek, B. Wendler, A. Rylski: Corrosion resistance and thermal stability of hybrid coatings. Annales de Chimie et de Science des Matériaux 28 Suppl. 1 (2003) 167 - 174.
  66. T. Liśkiewicz, B. Wendler, S. Fouvry, Ph. Kapsa, L. Vincent: FRETTING. Mechanician 5-6 (2003) 364-367; in Polish.
  67. M. Danielewski, A. Gil, B. Wendler, Z. Żurek: Hybrid coatings to-day and to-morrow. Inżynieria Materiałowa 6 Rok XXIV (2003) 439 -441.
  68. B.G. Wendler, M. Danielewski, K. Przybylski, A. Rylski, Ł. Kaczmarek, M. Jachowicz: New type AlMo-, AlTi- or Si-based sputtered protective coatings on metallic substrates. Proc. 12th Int. Sci. Conf. AMME'2003, Gliwice-Zakopane 07-10.12.2003, L.A. Dobrzański (Ed.), 1033-1040. Druk Zakł. Graf. Polit. Śląskiej, Gliwice, 2003. ISBN 83-914458-9-5.
  69. T. Liśkiewicz, S. Fouvry, B.G. Wendler: Fretting wear and friction behaviour of a TiC coating on HSS substrate under variable loading conditions. Inżynieria Materiałowa 5 Rok XXV (2002) 515-519.
  70. B.G. Wendler, A. Młotkowski, Rozkład naprężeń w stali z powłoką TiC w obszarze styku skoncentrowanego. Inżynieria Materiałowa 5 Rok XXV (2002) 613-616.
  71. B.G. Wendler: Steel surface betterment with use of reactive upward diffusion of carbon from the steel substrate. Dissertation No. 290 of the Lodz University of Technology, 2001
  72. M. Dudek, B.G. Wendler, S. Fouvry, Ph. Kapsa: Kinetics of fretting wear of TiC/VC coatings on M2 HSS steel. J. Wide Bandgap Materials 9, July-Oct. 2001, 31-42. Sage Publications, ISSN 1524-511x.
  73. Ł. Kołodziejczyk, S. Fouvry, B.G. Wendler, Ph. Kapsa: Mechanical and tribological characteristics of modulated coatings on 6-5-2 HSS steel. Materials Engineering 6 (119) Vol. XXI (2000) 257 - 260
  74. B.G. Wendler: Stress estimation in coatings and substrates by means of FEM method. Materials Engineering 3 (116) Vol. XXI (2000) 129 - 131.
  75. B.G. Wendler, A. Młotkowski: Residual stresses in coatings and substrates with use of FEM method: the effect of coatings' thickness, of substrate's shape and the critical role of the free edge. Lecture during 4th EUROMRCH Solid Mechanics Conf. in Metz, France, June 26-3-, 2000, Session Solid Mechanics.
  76. B.G. Wendler, A. Młotkowski: Residual stresses in coatings and substrates by FEM method: the effect of coatings' thickness, of substrate's form and the critical role of the coating's edge.Proc. XIIth Special Summer School "Modern Plasma Surface Technology" in Koszalin 08.06.2000- 12.06.2000, W. Precht (Ed.), Printed by Techn. Univ. of Koszalin, (2000) 217 - 229
  77. B.G. Wendler, M. Kamiński, M. Danielewski, Z. Grzesik, A. Rylski (2000): Titanium carbide and carbonitride coatings as corrosion and diffusion barriers on steels. Materials Engineering 6 (119) Vol. XXI (2000) 466 - 469
  78. J. Zimnicki, B.G. Wendler, R. Pawlak: Laser hardening of titanium with use of TiC synthesis. Materials Engineering 6 (119) Vol. XXI (2000) 390 - 393.
  79. B.G. Wendler: Structure and mechanical, tribological and exploitation characteristics of multilayer carbide and carbonitride coatings on HSS steels. Materials Engineering 6 (119) Vol. XXI (2000) 466 - 469.
  80. B.G. Wendler, K. Jakubowski, Ł. Kołodziejczyk: X-Ray Texture of Single and Multilayer Transition Metal and Respective Carbide coatings on HSS Steels". Proc. XIth Special Summer School "Modern Plasma Surface Technology" in Koszalin 31.05-02.06.1999, W. Precht (Ed.),printed by FENIKS, Koszalin (1999) 423 - 436. ISBN 83-87424-45-50.
  81. B.G. Wendler: Synthesis of modulated multilayer transition metal carbide and carbonitride coatings with different modulation parameters. Report from Polish State Research Committee Project 7 T 08C 037 12 (March, 1999).
  82. S. Miklaszewski, P. Beer, M. Zbieć, B.G. Wendler, S. Mitura, A. Michalski: Resistance to Wear of the Surface modified milling Tools during the milling Process of the Wood-based Materials. Proc. 14e Seminaire Int. sur l'Usinage du Bois, Paris-Epinal-Cluny, 12-19.09.1999. Imprimé par Ecole Nat. Sup. D'Arts et Métiers ENSAM, Cluny (1999) 463 - 468.
  83. S. Miklaszewski, P. Beer, B. Wendler: Milling of MDF with Tools Made of Steel. Proc. II Int. Conf. "Steel Structure & Treatment" in Zvolen-Nitra, Slovak Rep., October 8-9 1999, Printed by Zvolen Technical University (1999) pp. 85 - 87
  84. B.G. Wendler: Simultaneous Surface and Bulk Hardening of HSS steels. Surface and Coatings Technology 100-101 (1998) 276-279
  85. B.G. Wendler, M. Molinaro: TiC-NbC Multilayer Carbide Coatings on HSS Steels Deposited by Indirect Method. Proc. Xth Jubilee Summer School "Modern Plasma Surface Technology - Mielno'98" in Mielno, 12 - 15.05.1998, W. Precht (Ed.), printed by FENIKS, Koszalin (1998) 423-426
  86. B.G. Wendler, J. Glazunov: Simulation of Upward Diffusion of Carbon from the steel substrate during double carbide coating by means of indirect method. Proc. All-Polish Conf. on Materials in Shipyard Industry in Szczecin, 10 - 13.09.1998, Vol. 2, Printed by PPH ZAPOL, Szczecin (1998) 605-610. ISBN 83-87377-16-3.
  87. J. Zimnicki, K. Rożniakowski, B. Wendler, W. Kalita, J. Hoffman,: Journal of Mat. Science (1998) B.G. Wendler, K. Jakubowski, D. Heger: Structure and properties of modulated TiC/VC carbide coatings on HSS steels. Materials Engineering 4 (1998) 994-997 (in Polish).
  88. B.G. Wendler, K. Jakubowski, P. Kula, S. Fouvry, Ph. Kapsa, L. Vincent, D. Heger: Structure and Properties of modulated TiC/VC Coatings on Steels. Proc. All-Polish Conf. on Materials in Shipbuilding and Shipyard Industry in Szczecin, 10 - 13.09.1998, Vol. 2, Printed by PPH ZAPOL, Szczecin (1998) 611 - 616. ISBN 83-87377-16-3.
  89. B.G. Wendler, K. Jakubowski, P. Kula, S. Fouvry, Ph. Kapsa, L. Vincent: Structure and properties of modulated TiC/VC coatings on steels. Proc. 36. DGO Oberflächentage'98, Schwäbisch Gmünd, Oktober 07-09 (1998) 6-11 (Invited Lecture).
  90. K. Łukasik, B.G. Wendler, Z. Chejchman: The effect of a titanium carbide coating on the life of metal forming tools. Proc. Int. Baltic Sea Seminar on Metal forming and cutting - BAMFAC'98, Vilnius (Lithuania), 2-3 June (1998) 103-108.
  91. K. Polański, E. Misiak, B.G. Wendler : Chemical Composition of Thin Films by X-Ray Microanalysis. Proc. I Congress of Polish Vacuum Society in Cracow, June 25-27 (1998) 425-429. ISBN 83-233-1198-6.
  92. Z. Haś, B. Kruszyński, B.G. Wendler, D. Jachowicz: Durability of titanium carbide coated screw-taps from 6-5-2 HSS steel. Proc Int. Sem. "Surface Engineering'97" in Warsaw 12-14.05.1997, Printed by Institute of Precision Mechanics in Warsaw (1997) 453 - 458.
  93. P. Kula, B.G. Wendler, R. Pietrasik, B. Kołys, J. Chmielecka: H2 determination in surface layers by means of chromatographic analysis of anode gas. Tribology 3 (1997) 261 272 (in Polish).
  94. P. Kula, R. Pietrasik, B.G. Wendler, K. Jakubowski: The effect of hydrogen in lubricated frictional couples. WEAR 212 (1997) 199 205.
  95. B.G. Wendler, Z. Chejchman: The effect of TiC coating deposited by indirect method onto the durability of HSS tools for plastic working. Proc. VIth Sci.-Techn. Conf. in Bydgoszcz - Pieczyska, 12-13.06.97. Printed by Agricultural Academy in Bydgoszcz (1997) 102 - 111.
  96. B.G. Wendler: Complex surface and bulk treatment of tools and machine parts of HSS steel. Instrument 5 (1996) 24-25 (in Russian). Sankt Petersburg, Russia, 1996
  97. B.G. Wendler, A. Rylski, J. Pruszynski, M. Linek and M. Carruth, Proc. V Europ. Conf. Trends and New Applications in Thin Films, Colmar (France), 01-03.04.1996; Suppl. Le Vide: Science, Techniques et Applications 279 (1996) 85-87.
  98. Y. Benarioua, N. Bouaouadja and B.G. Wendler: J. Mat. Sci. Lett. 15 (1996) 1067
  99. B.G. Wendler: Complex (surface and bulk) treatment technology of machine parts and tools made from HSS steel. Proc. IIIrd Conf. on Surface Treatment, Czest.-Kule, Poland, 09-12 Oct. 1996. Printed by Czestochowa Techn. Univ. (1996) 423-430 (in Polish). ISBN 83-87039-21-7.
  100. B.G. Wendler, Z. Gawronski, A. Blaszczyk, Z. Chejchman, K. Jakubowski: Hard Coatings on Steels by Indirect Method. Proc. 4th Europ. Symp. & Exhib. on Semiconductor Eng. and Materials Technology in Warsaw, 25 - 28 April 1994, Printed by Warsaw Univ. of Technol. (1995) 93-94.
  101. K. Rożniakowski, J. Zimnicki, A. Drobnik, B.G. Wendler: Estimation of the Effective Reflection Coefficient from Titanium Surface for the CO2 Laser Radiation. Optica Applicata, XXV, No.1 (1995) 25-29
  102. B.G. Wendler, Z. Gawronski, A. Blaszczyk, K. Jakubowski: Mechanism of Surface Hardening by Indirect Method. Proc. 14th Int. Scient. Conf. on Advanced Materials Technology AMT'95 in Gliwice - Zakopane (Poland), 17-21 May 1995, L.A. Dobrzański (Ed.). Printed by Techn. Univ. Gliwice (1995) 451- 458. ISBN 83-90699-1-5.
  103. B.G. Wendler: Creation of Superhard TiC/(W,Ti)C1-x Layers on ASP2060 HSS Steel. Proc. 5th Summer School on Modern Plasma Surface Technology in Koszalin-Mielno (Poland), 30 Sept.-02 Oct. 1994, W. Precht (Ed.). Printed by WSI Koszalin (1995) 138-149.
  104. B.G. Wendler, Problems of Maintenance No. 5 (18) 1995. Special Issue Proc. of Scient. Conf. on State Committee Projects on Materials Engineering in Zbozenna, December 1995. T. Burakowski (Ed.), Printed by ITE Typography, Radom, 1995, 263 - 271. ISSN 1232-9312.
  105. B.G. Wendler, Proc. Int. Conf. on Materials in Machine Construction in Minsk, 28.11 - 01.12.1995, K.K. Kiber (Ed.), Minsk, Belarus (1995) 20
  106. B.G. Wendler: The effect of substitutional impurities on phase transformations in transition metals carbide and carbonitride coatings produced by a reverse duplex method. Proc. IVth Int. School on Modern Plasma Surface Technology, Mielno (Poland), 16-18 Sept. 1994. W. Precht (Ed.), Printed by WSI Koszalin, 1994, 65-75 (in Polish).
  107. B.G. Wendler: Single MeC or Composite MeC/Me(C,N)/MeN Coatings on Steels by Means of an Indirect Method. Proc. 4th Int. Symp. on Trends and New Applications in Thin Films - TATF'94 and 11th Conf. on High Vacuum, Interfaces and Thin Films - HVITF'94 in Dresden (FRG), March 7 - 11, 1994, Ed. by G. Hecht, F. Richter, J. Hahn, DGM Informationsgesellschaft - Verlag 1994, 694 - 697.
  108. B.G. Wendler, Z. Gawronski, A. Blaszczyk, K. Jakubowski: Creation of Thin Carbide Layers on Steels by Means of a Reverse Duplex Method. NUKLEONIKA 39 No. 3 (1994) 119 -126.
  109. K. Rożniakowski, B.G. Wendler, J. Zimnicki, Quantum Electronics, Vol.34 (2) 1994, 243-244
  110. B.G. Wendler, A. Blaszczyk, Z. Chejchman, Z. Gawronski, K. Jakubowski: Creation, Properties and Applications of Thin Carbide and Carbonitride Layers on Tool Steels. Proc 1st Conf. on Modern Technologies in Surface Engineering in Lodz-Spala, 20-23 Oct. 1993, Printed by KWADRAT, Lodz (1994) 243 - 253.
  111. B.G. Wendler, A. Lorenz, Z. Has: The Effect of Hard Coating on Axial Force and Moment of Friction During Machining. Proc 1st Conf. on Modern Technologies in Surface Engine-ering in Lodz-Spala, 20-23 Oct. 1993, Printed by KWADRAT, Lodz (1994) 255 - 260.
  112. B.G. Wendler, Z. Chejchman, J. Wozniak, R. Skurtys: Application of Indirect Method to Compression Moulds. Proc 1st Conf. on Modern Technologies in Surface Engineering in Lodz-Spala, 20-23 Oct. 1993, Printed by KWADRAT, Lodz (1994) 261 - 263.
  113. B.G. Wendler: Archives on Materials Vol.14, No.1/2 (1993), Ed. Silesian Univ. in Katowice (Poland), 127-141
  114. B.G. Wendler, Z. Chejchman: Indirect Method of Deposition of Carbide and Carbonitride Layers on Tools for Plastic Working of Metals. Proc. 5th Conf. on Tool Steels for Plastic Working of Materials in Bydgoszcz-Pieczyska (Poland), 25 - 27 Oct. (1993), Printed by WSI Bydgoszcz (1993) 175.
  115. B.G. Wendler, K. Jakubowski, A. Amroune: Applied Crystallography, Ed. World Scientific Publ. Comp. (1993) 231-233
  116. B.G. Wendler, Y.Benarioua: Applied Crystallography, Ed. World Scientific Publ. Comp. (1993) 228-230
  117. B.G. Wendler: Creation of Single and Composite Layers of Carbides, Carbides and Nitrides or Carbonitrides of Transition Metals on Steels. Proc. 1st Seminar on Composites, Sinters and Ceramics in the Construction of Machines, Lodz (Poland) Jan. 25 (1993) 67-76
  118. B.G. Wendler: Creation of Thin Ta Cor TiC Layers on Steels. J. Materials Science and Technology A 163 (1993) 215-217
  119. B.G. Wendler: Manufacturing of mono- and composite carbide, carbonitride and nitride coatings of Tantalum and Titanium on steel substrates with use of a reverse duplex method. Proc. 2nd Conf. on Surface Technologies, Kule (Poland) Oct.13-15 (1993), Ed. Techn. Univ. in Czestochowa (Poland) 149-153
  120. B.G. Wendler:Hard Coatings on Steels by Means of an Indirect Method. Proc. 3rd Summer School on Modern Plasma Surface Technology in Koszalin - Mielno (Poland), 26-28 Nov. (1992), Ed. High Technical School in Koszalin (Poland) 1993, 139-157
  121. B.G. Wendler: Creation of Thin TaC and TiC Layers on Steels. Proc. XIIIth Int. Conf. on Advanced Materials and Technologies AMT'92, Ed.Techn.Univ. of Warsaw (1992) 114-115.
  122. B.G. Wendler, K.Jakubowski: Vacuum Annealing Study of Thin TiC Films on Steels", J. Vac. Sci. Technol. A (6) 1 (1988) 93-98.
  123. B.G. Wendler: On the Mechanism of Deposition of Thin a-C:H Films by RF Plasma Decomposition of Hydrocarbons. VACUUM 36 (1986) 107-109
  124. B.G. Wendler, K.Jakubowski: Structure of Thin TiC Films Deposited by ARE and BARE Methods. Proc. XIIth Int. Conf. Appl. Cryst., Cieszyn (Poland) Aug.10-14(1986)
  125. B.G. Wendler, M. Clapa: Pin-On-Disc Laboratory Apparatus for Measurement of Friction and Wear. Tribology Vol.12 No.1 (1986) 16-18
  126. B.G. Wendler: Vacuum Annealing Study of the Structure and of Mechanical Properties of Thin TiN Films Deposited by ARE. Thin Solid Films Vol,141 (1986) 223-228
  127. P. Kolodziejczyk, B. Piotrowski, M. Szajdzinski, B.G. Wendler, J. Zimnicki:The Effect of External Magnetic Films and/or Ar Admixture on the Mechanical Electrical and Optical Properties of Thin Carbonaceous Films Obtained in the Asymetric RF Discharge. Proc. Ist Int. Conf. Diamond Crystallization under Reduced Pressure, Warsaw-Jablonna, (Poland), June 27-30 (1985) 10.
  128. B.G. Wendler: The Effect of External Magnetic Field and/or Ar Admixture on the Critical Parameters of Deposition of Thin Hard Carbonaceous Films Obtained by Methane Decomposition in the RF Plasma Discharge. Proc. Ist Int. Conf. Diamond Crystallization under Reduced Pressure, Warsaw-Jablonna, (Poland), June 27-30 (1985) 23.
  129. J. Kulig, K. Zielinski, J. Zajgner, A. Bronka, W. Tkaczewski, H. Adamska-Dyniewska, Z. Zapędowski, B.G. Wendler: Sci.Rep. of the Medical Academy of Lodz (Poland), Vol.XXVIII No.2 (1985) 118 - 142.
  130. A. Drobnik, K. Rozniakowski, B.G. Wendler, J. Zimnicki:"Interaction of High Power Nd+ Laser Light with Diamondlike Carbon Layers", Proc. 5th International Conference on Laser Applications, Dresden, Germany, Oct. 18-20 (1985).
  131. B.G. Wendler, A. Rylski: Quantitative Auger Spectrometry of Thin TiN Films. Acta Universitatis Vratislaviensis, Ser. Mathematics, Physics and Chemistry, No.XLIV, Wroclaw (Poland) 1985, 163-170.
  132. B.G. Wendler, Z. Has, S. Mitura:The Effect of the Deposition Parameters on the Composition, Structure and Mechanical Properties of Thin TiN Films. Proc. 2nd Sci. Conf. on Electron Technology, Warsaw-Rynia (Poland) 13-16.09.1984, 299.
  133. B.G. Wendler, Z. Has, L. Klimek, S. Mitura: Morphology of Thin TiN Films Deposited by ARE onto Different Substrates. Proc. 2nd Sci. Conf. on Electron Technology, Warsaw-Rynia (Poland) 13-16.09.1984, 300.
  134. Z. Has, S. Mitura, M. Clapa, P. Pieta, J. Szmidt, B.G. Wendler: Properties of Thin Diamondlike Carbon Films Obtained by Hydrocarbons Decomposition in the HF Electric Fields. Proc. 2nd Sci. Conf. on Electron Technology, Warsaw-Rynia (Poland) 13-16.1984, 298.
  135. Z. Has, S. Mitura, E. Mitura, B.G. Wendler: Mechanisme of Deposition of Thin Diamondlike Carbon Films. Proc. 2nd Sci. Conf. on Electron Technology, Warsaw-Rynia (Poland) 13-16.09.1984, 308.
  136. B.G. Wendler: Vacuum Annealing Study of the Structure and of Mechanical Properties of Thin TiN Films Obtained by ARE and RIP. Proc. 6th International Conference on Thin Films ICTF-6, Stockholm (Sweden) Aug. 13-17 (1984) 126.
  137. B.G. Wendler, K.Jakubowski: On the Texture of Thin TiN Films Deposited by ARE and RIP. Proc. 6th International Conference on Thin Films ICTF-6, Stockholm (Sweden) Aug. 13-17 (1984) 292.
  138. B.G. Wendler: Metastable Phase Formation During Deposition of Thin TiN Films by ARE. Proc. 6th International Conference on Thin Films ICTF-6, Stockholm (Sweden) Aug. 13-17 (1984) 458
  139. B.G. Wendler: Numerical Calculation of Elastic Stresses of the Ist Kind by Means of the sin2 Method. Proc. XI Int. Conference on Applied Crystallography, Kozubnik (Poland) Sept.10-14 (1984) 240-243.
  140. B.G. Wendler: Structure of Thin TiN Films Deposited by ARE. Proc. XI Int. Conference on Applied Crystallography, Kozubnik (Poland) Sept.10-14 (1984) 580-585.
  141. B.G. Wendler, K.Jakubowski: On the Texture of Thin TiN Films. Proc. XI Int. Conference on Applied Crystallography, Kozubnik (Poland) Sept.10-14 (1984) 585-589.
  142. B.G. Wendler, A. Rzepkowski, J. Powierza, J. Leszczynski: New Method of Internal Friction Measurement in Wide Range of Frequencies. Sci.Rep. of the Silesian University in Katowice (Poland) No. 615 (1984) 252-255.
  143. Z. Has, B.G. Wendler, S. Mitura: Chemical Composition, Structure and Mechanical Properties of Thin TiN Films Deposited by ARE and RIP Methods. Proc. 3rd Int. Conference on Carbides, Nitrides and Borides, Poznan-Kolobrzeg (Poland) 1984, 245-250.
  144. S. Mitura, B.G. Wendler: RF-Sputtering of PTFE Substrates. Proc. 3rd Int. Conference on Carbides, Nitrides and Borides, Poznan-Kolobrzeg (Poland) 1984, 113-114.
  145. Z. Has, S. Mitura, B.G. Wendler: RF-Plasma Deposition of Thin Diamondlike Films. Proc. Int. Ion Engineering Congress ISIAT-IPAT'83, Kyoto, Japan, Sept. 12-16 (1983) C-160.
  146. B.G. Wendler: Verification of the Granato-Lücke Model of Dislocation Damping on the Example of Cu monocrystals with Different Impurities. Sci. Rep. of the Technical University of Lodz, Mechanics No.66 (1983) 55-73.
  147. B.G. Wendler, S. Mitura: Structure and Properties of Thin PTFE Films Obtained by Plasma Polymerization. Proc.5th Int. Conf. Appl. of PHILIPS Electron Microscopes for Research in Biology, Medecine and Technology, Visegrad (Hungary) April 1-2 (1982)61-62
  148. B.G. Wendler: Comparison of RF-Sputtered and Plasma Polymerized Thin Fluorocar-bon Films. Proc. 4th Int.Conf. Appl. of PHILIPS Electron Microscopes for Research in Biology, Medecine and Technology, Zakopane (Poland) Nov.19-21 (1980) 125-129.
  149. B.G. Wendler: Amplitude Dependent Internal Friction in Polycrystalline Zn with Impuri-ties. Metallurgy No. 26, Ed. Ossolineum (Wroclaw), Poland (1979) 77-84.
  150. S. Mitura, B.G. Wendler: Structure and Adhesion to Different Substrates of Thin PTFE Films Obtained by RF-Sputtering and Electrostatic Spraying. Proc.3rd Int. Conf. Appl. of PHILIPS Electron Microscopes for Research in Biology, Medecine and Technology, Zakopane (Poland) Nov.14-16 (1979) 89-84.
  151. T. Plaskota, B.G. Wendler: The method of Recuperation of Diamond and Refractory Metal Carbides From Worn Diamond Tools. Proc.Int .Conf. on Industrial Appl. of X-Ray Spectrometry and Diffractometry, Opole-Turawa Poland, April 14-18 (1978).
  152. B.G. Wendler, Z.Gutowski: Comparison of the Retained Austenite Content in Quenched Steels After Various Kinds of Heating. Proc.Int .Conf. on Industrial Appl. of X-Ray Spectrometry and Diffractometry, Opole-Turawa Poland, April 14-18 (1978).
  153. C.F. Burdett, B.G. Wendler: Internal Friction in the Vicinity of the Grain Boundary Peak in Zinc. J. Mat. Sci. Vol.11(1976), 817-822.
  154. C.F. Burdett, B.G. Wendler: Grain Boundary Damping in Polycrystalline Zn. Sci. Rep. of the Technical University of Lodz, Mechanics, No.49 (1976) 5-15.
  155. Z. Wendorff, B.G. Wendler: Thermal Conductivity of HSS Steels at Medium and at Elevated Temperatures. Sci. Rep. of the Institute of Machining, Cracow, Poland (1970), No. 107.

 Awards and Honours



  • "Lodzkie Eureka 2012" award from Committe of High Education and Science at President of Lodz for the " Technology of coating deposition by magnetron sputtering with high density plasma awarded on 7th International Exhibitions of Inventions in Kunshan, China (2013),
  • Gold Medal from Jury of  International Salon of Inventions and New Technologies (Sevastopol, Ukraine) - New Time for the " Superhard Coating on Sintered and Hs Steels" on the 7th International Exhibition of Inventions, Kunshan, China (2012)
  • Gold Medal from China Associationof Inventions on 7th International Exhibition of Invention for the "Superhard Coatings on Sintered and Hs Steels" in Kunshan, China (2012)
  • Award from China Science & Marchants Capital Menagement Group and China Association Inventions for the "Superhard Coating on Sintered Carbides and Hs Steels" on 7th International Exhibition of Inventions, Kunshan, China (2012)
    Gold Prize from Jury of V International Warsaw Invention Show IWIS'2012 for the "Duplex treatment of steel and cast-iron substrates for significant decrease of friction and wear" (2011)
  • Special Award for outstanding performence in V International Warsaw Invention Show IWIS'2012 with " Superhard coatings on any substrates" (2011)
  • Gold Prize from Jury of V International Warsaw Invention Show IWIS'2011 for the "Superhard coatings on any substrates" (2011)
  • "Lodzkie Eureka 2010" award from Committe of Higher Education and Science at President of Lodz for the " High density gas impulse plasma reactive magnetron deposition of superhard nanocomposite nc-TiN/a-SiN awarded with three Golden Medals in Warsaw, Brussels and Seoul"
  • Gold Prize form Jury of the Seoul International Invention Fair for the " High density gas impulse plasma reactive magnetron deposition of superhard nanocomposite nc-TiN/a-SiN coatings" (2010),
  • Gold Medal from Jury of The Belgian And International Trade Fair For Technological Innovation BRUSSELES EUREKA for the " High density gas impulse plasma reactive magnetron deposition of superhard nanocomposite nc-TiN/a-SiN coatings" (2010),
  • Gold Medal from Jury of IV International Warsaw Invention Show IWIS'2010 for the "High density gas impulse plasma reactive magnetron deposition of superhard nanocomposite nc-TiN/a-Si3N4 coatings",
  • Gold Prize form Jury of the Seoul International Invention Fair for the "Low friction, wear resistant WC1-X/C coatings" (2008),
  • Gold Medal from Jury of the Belgian And International Trade Fair For Technological Innovation BRUSSELES EUREKA for the "Low friction, wear resistant WC1-X/C coatings" (2008),
  • Gold Cross of Merit Award from the Minister of Education of Poland (2008),
  • Officer's Cross No. 1548 from the King of Belgium Charles Albert Baudouin (2008),
  • Four Prizes from the Minister of Education and from the President of the State Committee for Scientific Research for popularization of polish scientific achievements abroad in the years (2000-2008),
  • Gold Medal from the Jury of International Invention Fair in Zagreb, Croatia (2008),
  • Award Certificate for the Invention "Metal-Ceramic Composite Ti6Al4V-TiN" from the China Association of Inventions during 6th International Invention Fair in Suzhou, P.R. of China (2008),
  • Fellow of the World Academy of Materials and Manufacturing Engineering (2006),
  • Gold Medal from the Jury of International Invention Fair IWIS'2007 in Warsaw for the "Protective coatings on ferritic steels",
  • Gold Medal from the Jury of International Invention Fair IWIS'2007 in Warsaw for the "Metal-ceramic composite Ti6Al4V-TiN",
  • Silver Medal from the Jury of International Invention Fair INST'2007 in Taipei (Taiwan) for "Protective coatings on ferritic steels",
  • Gold Medal from the Jury of 56th International Invention Fair "BRUSSELS EUREKA Contest'2007" w Brukseli for "Protective coatings on ferritic steels",
  • Cup from the Minister of Education and from the President of the State Committee for Scientific Research (2006),
  • Medal of Honour No. 162 in the name of Tadeusz Sendzimir from the Association of Polish Inventors and Rationalizers for outstanding accomplishments in the domains of inventions and of materials engineering (2005),
  • Two Knight's Crosses Nos. 1690 and 1697 from the King of Belgium Charles Albert Baudouin (2000 and 2002),
  • Gold Medal with Mention from the Jury of International Invention Fair in Seoul (2004),
  • Gold Medal with Mention from the Jury of International Invention Fair in Seoul (2004),
  • Medal GENIUS'2004 from the International Jury during International Invention Exhibition in Budapest, Hungary, 2004,
  • Bronze Medal from the International Jury during International Invention Fair in Geneva, Switzerland (2004),
  • Medal INTARG and Diploma from the Jury of Economy and Scientific Invention Fair INTARG'2003 in Katowice, Poland, 2003),
  • Medal of Honour for commemoration of 10 years from foundation of the Centre for International Education in the Lodz University of Technology (2003),
  • Silver Honour Mark of Distinction from the Polish Principal Technical Organisation,
  • Gold and Silver Honour Marks of Distinction from the Association of Polish Inventors and Rationalizers (2001 and 2002),
  • Two Silver Honour Marks of Distinction from the Association of Polish Engineers and Technicians (1999 and 2002),
  • Medal GENIUS-2002 and the JEROME CUP-2002 from the International Jury during International Invention Exhibition in Budapest, Hungary (2002),
  • GOLDEN KEY AWARD OF LONDON and ATTESTATION OF EXCELLENCE during the International Invention Exhibition in London, UK (1997),
  • M. Curie-Skłodowska's Gold Medal during the International Invention Exhibition in Gdynia, Poland (1998),
  • Medal during the International INTERTECHNOLOGY Invention Fair in the Lodz University of Technology in Lodz , Poland (1998),
  • Certificate of APPRECIATION from the Carnegie-Mellon University in Pitsburg, USA (1997),
  • Deputy Secretary General of the Int. Association for the Exchange of Students for the Technical Experience (IAESTE),
  • President of the Polish Branch of the IAESTE,
  • Editor of the booklet "High Technology Offers'96" (in English language) informing of the innovative offers of the Members of Staff of the Lodz University of Technology,
  • Co-founder and Deputy-Editor of the bilingual polish-english bulletin of the Polish UNESCO-Unispar Working Group "Polski Rynek Innowacji/Polish Innovation Market" (20 Nos in the period 1997-2001),
  • Memberships of Organising or Scientific Committees of National and International Conferences: 6,
  • Beginning from 1996 (3 tenures) - Memberships of the Board of the Section of the Surface Plasma Treatment of the Polish Vacuum Society,
  • Close scientific and educational co-operation with Ecole Centrale de Lyon as well as with the CNRS Laboratory of Tribology and Dynamic Systems in Lyon, France, beginning from 1992,
  • The Coatings' Engineering Division is well recognized by the students from numerous western and eastern countries. Beginning from 1994 it has received a number of 15 students from China, Finland, Germany, Japan, Great Britain, USA and Uzbekistan for the two-months summer practices in the frame of the students' exchange organized by IAESTE,
  • Gold Cross of Merit Award from the Minister of Education of Poland (1987).
Page 1 of 3